How to Take Apart a Bissell Vacuum Cleaner

Author:

Published:

Updated:

how to take apart a bissell vacuum cleaner

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Are you facing issues with your Bissell vacuum cleaner and need to troubleshoot or repair it? Knowing how to take apart a Bissell vacuum cleaner can be the first step towards resolving any performance problems or conducting maintenance. In this guide, I will provide you with a step-by-step disassembly process, enabling you to dismantle your Bissell vacuum cleaner with confidence.

Key Takeaways:

  • Find the gray tab located above the power switch to detach the handle extension from the body.
  • Remove the vacuum foot and clean the plates to prevent any dirt buildup.
  • Dismantle the nozzle from the motor component, taking caution of debris in the filter nozzle.
  • Remove the foam vent filter for cleaning and be careful with the warning sticker on the motor component.
  • Untangle cords, detach the motor, and clean around it with a soft bristle brush.

Step-by-Step Disassembly of a Bissell Vacuum Cleaner

Disassembling a Bissell vacuum cleaner for repair or maintenance requires careful step-by-step disassembly. Follow these instructions to dismantle your Bissell vacuum cleaner:

  1. Attach the Upper Handle: Start by putting the upper handle onto the base of the Bissell vacuum cleaner and push it down firmly.
  2. Secure the Handle: Use the 2 screws taped to the handle to secure the handle into the base.
  3. Lock the Lower Cord Wrap: Turn the lower cord wrap clockwise to lock it into place.
  4. Insert and Lock the Hose: Insert the end of the hose into the back of the vacuum and turn it clockwise to lock it into place.
  5. Wrap the Hose: Wrap the rest of the hose up and around the hose wrap on the handle and slide the end of the hose into the vacuum base on the right side.
  6. Attach Accessory Tools: Attach the accessory tools to the vacuum, with the dusting brush positioned under the hose and the TurboBrush tool on the top front of the upper handle. The crevice tool can be stored inside the extension wand.
  7. Wrap the Cord: Wrap the cord around the upper and lower cord wrap.

“Now that you’re familiar with the assembly of the Bissell vacuum cleaner, you can proceed with disassembling it for repair or maintenance.”

Follow these steps to disassemble your Bissell vacuum cleaner and access the internal parts for repair or maintenance. With proper disassembly, you can easily remove and clean specific components, ensuring optimal performance and longevity of your Bissell vacuum cleaner.

Troubleshooting and Maintenance Tips for Bissell Vacuum Cleaner

If you’re experiencing low suction or poor pick-up with your Bissell vacuum cleaner, it’s crucial to troubleshoot the issue. One common cause of reduced suction power is a clog in the system. To check for debris build-up or clogs, first, remove the Easy Empty dirt tank and inner cyclone. Inspect the upper tank and suction inlet for any obstructions.

Another area to check for possible clogs is the hose and intake areas. Start by removing the hose wand from the base. Use a long, narrow object like the crevice tool to carefully clear away any blockages that may be along the length of the hose. Remember to avoid using sharp objects that could potentially puncture the hose.

If you find a clog in the lower hose, remove the screw that attaches the hose wand base to the vacuum. Straighten the hose wand base and inspect for any obstructions before reattaching the screw.

Regular maintenance and the use of genuine Bissell replacement parts are key to ensuring the optimal cleaning performance of your Bissell CleanView vacuum cleaner. Keep your vacuum cleaner in top shape by regularly cleaning and maintaining its components.

FAQ

How do I take apart a Bissell vacuum cleaner?

To start disassembling a Bissell vacuum cleaner, find the gray tab located directly above the power switch, where the blue body of the vacuum meets the gray handle extension. Lift the tab and pull the gray extension bar away from the blue body. Remove the vacuum foot from the main body by firmly gripping each piece and pulling them apart. Use a number 2 Phillips head screwdriver to remove the 6 screws from the base plate of the vacuum foot. Keep track of the screws for reassembly later. Grip the top and bottom plate of the vacuum foot firmly and pull them apart completely. Use a medium-sized brush to remove dirt from the plates of the vacuum foot. It is safe to rinse the parts with water instead of brushing, as there are no electrical components. Press the indented side of the center gray latch and carefully separate the nozzle from the motor component. Be cautious of dirt and debris in the filter nozzle. Pinch the gray center ridge of the filter and pull it away from the blue nozzle. Take caution as dust and dirt may fall out. Locate the warning sticker on the bottom of the motor component and fold back half of it. Use a scraper to lift one corner of the warning sticker. Remove the foam vent filter and brush it with a toothbrush or small, soft bristle brush to dislodge dirt particles. Use a number 2 Phillips head screwdriver to remove all 7 screws from the motor component. Keep track of the screws for reassembly. Pry the two halves of the vacuum apart enough to detach the handle extension release tab from the end of the motor component. Grip both sides of the central component and pry the two halves apart while ensuring the bottom half remains flat. Untangle and unwrap any cords and wires from around the motor. Gently lift the motor up and away from the blue plastic. Use a small, soft bristle brush to gently brush around the motor and dislodge any loose dirt or debris. Now that you’re familiar with the assembly of the Bissell vacuum cleaner, you can proceed with disassembling it for repair or maintenance.

What should I do if my Bissell vacuum cleaner has low suction or poor pick-up?

If you’re experiencing low suction or poor pick-up with your Bissell vacuum cleaner, there may be a clog. Remove the Easy Empty dirt tank and inner cyclone to check for debris build-up or clogs in the upper tank and suction inlet. Check the hose and intake areas for possible clogs. Remove the hose wand from the base and use a long, narrow object like the crevice tool to clear away obstructions along the length of the hose. Avoid using sharp objects that may puncture the hose. To clear the lower hose, remove the screw attaching the hose wand base to the vacuum. Straighten the hose wand base and check for clogs before reinstalling the screw. Regular maintenance and the use of genuine Bissell replacement parts are essential for optimal cleaning performance of your Bissell CleanView vacuum cleaner.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts